韩国大林 PP EP-340K

嵌段共聚薄壁注塑级

📋 产品简介

💪

优异力学

拉伸强度27MPa，冲击强度10kJ/m²

🔥

优异性能

HDT 98°C

🧪

耐化学品

耐油耐溶剂，优异耐疲劳性

📐

尺寸稳定

优异尺寸精度和稳定性

⚡

高性能

满足高端应用要求

🔧

易加工

良好的注塑/挤出加工性

🚗

薄壁容器

⚡

快餐盒

🏭

杯盖

🏭 韩国大林 · PP EP-340K · 嵌段共聚薄壁注塑级

数据来源：韩国大林官方技术资料

干燥建议：PP吸湿性极低，通常无需预干燥；如存储环境潮湿，可60~80°C干燥1~2小时。

注意事项：PP收缩率较大(1.0~2.5%)，制品易翘曲变形，保压时间和冷却时间需充足；共聚PP比均聚PP加工温度略低。
* 以上参数为 PP（聚丙烯）通用参考范围，实际参数需结合具体牌号、制品结构、模具设计和设备条件进行试模验证。

If you have any questions about Korea Daelim PP EP-340K Block Copolymer Thin-Wall Injection Molding Polypropylene, or would like to request Korea Daelim PP EP-340K Block Copolymer Thin-Wall Injection Molding Polypropylene datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.

Korea Daelim PP EP-340K Block Copolymer Thin-Wall Injection Molding Polypropylene Properties, Korea Daelim PP EP-340K Block Copolymer Thin-Wall Injection Molding Polypropylene Product Parameters, Korea Daelim PP EP-340K Block Copolymer Thin-Wall Injection Molding Polypropylene Performance Data, Korea Daelim PP EP-340K Block Copolymer Thin-Wall Injection Molding Polypropylene Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA