云天化 POM MC90-G2

玻纤增强级

📋 产品简介

💪

优异力学

拉伸强度100MPa，弯曲模量5.0GPa

🔥

优异性能

HDT 140°C

🧪

耐化学品

耐油耐溶剂，优异耐疲劳性

📐

尺寸稳定

优异尺寸精度和稳定性

⚡

高性能

满足高端应用要求

🔧

易加工

良好的注塑/挤出加工性

🚗

汽车结构件

⚡

高载荷齿轮

🏭 云天化 · POM MC90-G2 · 玻纤增强级

数据来源：云天化官方技术资料

干燥建议：POM吸湿性较低，但为保证制品表面质量建议预干燥；干燥温度不宜过高。

推荐干燥温度 80~90°C，干燥时间 2~4小时，含水率控制在 < 0.1% 以下。

注意事项：POM对热敏感，严禁在料筒中长时间滞留(尤其超过230°C)，否则易分解产生甲醛气体；停机前须用PE或PP清洗料筒；不可与PVC共线加工。
* 以上参数为 POM（聚甲醛）通用参考范围，实际参数需结合具体牌号、制品结构、模具设计和设备条件进行试模验证。

If you have any questions about Yuntianhua POM MC90-G2 Glass Fiber Reinforced Grade Polyoxymethylene, or would like to request Yuntianhua POM MC90-G2 Glass Fiber Reinforced Grade Polyoxymethylene datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.

Yuntianhua POM MC90-G2 Glass Fiber Reinforced Grade Polyoxymethylene Properties, Yuntianhua POM MC90-G2 Glass Fiber Reinforced Grade Polyoxymethylene Product Parameters, Yuntianhua POM MC90-G2 Glass Fiber Reinforced Grade Polyoxymethylene Performance Data, Yuntianhua POM MC90-G2 Glass Fiber Reinforced Grade Polyoxymethylene Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA