乐天化学 ABS SD-0250

超高流动级

📋 产品简介

💪

优异力学

拉伸强度38MPa，Izod冲击170J/m

🔥

优异性能

🧪

耐化学品

耐油耐溶剂，优异耐疲劳性

📐

尺寸稳定

优异尺寸精度和稳定性

⚡

高性能

满足高端应用要求

🔧

易加工

良好的注塑/挤出加工性

🚗

大型薄壁家电面板

⚡

空调外壳

🏭 乐天化学 · ABS SD-0250 · 超高流动级

数据来源：乐天化学官方技术资料

干燥建议：吸湿性较强，成型前必须充分干燥，否则制品易出现银丝、气泡和表面光泽不良。

推荐干燥温度 80~85°C，干燥时间 2~4小时，含水率控制在 < 0.05% 以下。

注意事项：阻燃级ABS加工温度宜偏低，避免高温长时间滞留导致分解变色；外观件建议采用较高的模具温度以获得更好的表面光泽。
* 以上参数为 ABS 通用参考范围，实际参数需结合具体牌号、制品结构、模具设计和设备条件进行试模验证。

If you have any questions about Lotte Chemical ABS SD-0250 Ultra High Flow Grade Acrylonitrile-Butadiene-Styrene Copolymer, or would like to request Lotte Chemical ABS SD-0250 Ultra High Flow Grade Acrylonitrile-Butadiene-Styrene Copolymer datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.

Lotte Chemical ABS SD-0250 Ultra High Flow Grade Acrylonitrile-Butadiene-Styrene Copolymer Properties, Lotte Chemical ABS SD-0250 Ultra High Flow Grade Acrylonitrile-Butadiene-Styrene Copolymer Product Parameters, Lotte Chemical ABS SD-0250 Ultra High Flow Grade Acrylonitrile-Butadiene-Styrene Copolymer Performance Data, Lotte Chemical ABS SD-0250 Ultra High Flow Grade Acrylonitrile-Butadiene-Styrene Copolymer Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA