三井化学 EVA H-2010

VA25%热熔胶级

📋 产品简介

💪

优异力学

拉伸强度6MPa，断裂伸长率950%

🔥

优异性能

VA含量25%

🧪

耐化学品

耐油耐溶剂，优异耐疲劳性

📐

尺寸稳定

优异尺寸精度和稳定性

⚡

高性能

满足高端应用要求

🔧

易加工

良好的注塑/挤出加工性

🚗

热熔胶

⚡

粘合剂

🏭 三井化学 · EVA H-2010 · VA25%热熔胶级

数据来源：三井化学官方技术资料

干燥建议：EVA吸湿性低，通常无需预干燥。

注意事项：EVA加工温度较低，VA含量越高加工温度越低；热稳定性较差，避免料筒长时间高温滞留；制品柔软，脱模时注意防止变形。
* 以上参数为 EVA（乙烯-醋酸乙烯共聚物）通用参考范围，实际参数需结合具体牌号、制品结构、模具设计和设备条件进行试模验证。

If you have any questions about Mitsui Chemicals EVA H-2010 VA25% Hot Melt Adhesive Grade, or would like to request Mitsui Chemicals EVA H-2010 VA25% Hot Melt Adhesive Grade datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.

Mitsui Chemicals EVA H-2010 VA25% Hot Melt Adhesive Grade Properties, Mitsui Chemicals EVA H-2010 VA25% Hot Melt Adhesive Grade Product Parameters, Mitsui Chemicals EVA H-2010 VA25% Hot Melt Adhesive Grade Performance Data, Mitsui Chemicals EVA H-2010 VA25% Hot Melt Adhesive Grade Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA