BASF Ultramid B 3WG6 PA6 Polyamide 30% Glass Fiber Heat Stabilized Reinforced Grade - Product Center - 星空官网入口

Ultramid B B 3WG6 — PA6 聚酰胺

巴斯夫 BASF | 高性能工程塑料

产品牌号Ultramid B B 3WG6

产品系列Ultramid B

材料类型PA6 聚酰胺

增强/填充30%玻璃纤维

产品级别热稳定增强级

生产厂家巴斯夫 BASF

30%玻璃纤维增强，热稳定改性

优异的长期热老化性能

高强度和刚性

尺寸稳定性好

适合汽车和工业高温应用

汽车进气歧管

发动机周边件

高温结构件

工业耐热配件

干燥建议：80~90°C / 4~8小时 / <0.2%

注意事项：PA6吸湿性强，必须充分干燥(含水率<0.2%)；料温过高易黄变，停留时间不宜过长。
* 以上参数为通用参考范围，实际参数需结合具体牌号和模具试模验证。

产品资质：巴斯夫 BASF Ultramid B 系列PA6 聚酰胺，可根据项目需求提供 TDS 技术资料、SDS 安全资料及原厂技术支持。

环保声明：符合欧盟 RoHS、REACH 法规要求，适用于工业制品生产。

免责声明：以上物性数据基于公开资料和典型应用经验，实际应用请结合具体配方和工艺进行验证。更多产品型号请联系 daoqinsh.com | 数据仅供参考，以原厂最新 TDS 为准。

If you have any questions about BASF Ultramid B 3WG6 PA6 Polyamide 30% Glass Fiber Heat Stabilized Reinforced Grade, or would like to request BASF Ultramid B 3WG6 PA6 Polyamide 30% Glass Fiber Heat Stabilized Reinforced Grade datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.

BASF Ultramid B 3WG6 PA6 Polyamide 30% Glass Fiber Heat Stabilized Reinforced Grade Properties, BASF Ultramid B 3WG6 PA6 Polyamide 30% Glass Fiber Heat Stabilized Reinforced Grade Product Parameters, BASF Ultramid B 3WG6 PA6 Polyamide 30% Glass Fiber Heat Stabilized Reinforced Grade Performance Data, BASF Ultramid B 3WG6 PA6 Polyamide 30% Glass Fiber Heat Stabilized Reinforced Grade Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA