BASF Ultramid B 3M5 PA6 Polyamide 25% Mineral Filled Mineral Filled Grade - Product Center - 星空官网入口

Ultramid B B 3M5 — PA6 聚酰胺

巴斯夫 BASF | 高性能工程塑料

产品牌号Ultramid B B 3M5

产品系列Ultramid B

材料类型PA6 聚酰胺

增强/填充25%矿物填充

产品级别矿物填充级

生产厂家巴斯夫 BASF

25%矿物填充

低翘曲，尺寸精度好

表面光洁度优异

各向同性收缩

适合外观和尺寸要求高的件

外观件

精密配合件

电子电气壳体

低翘曲结构件

干燥建议：80~90°C / 4~8小时 / <0.2%

注意事项：PA6吸湿性强，必须充分干燥(含水率<0.2%)；料温过高易黄变，停留时间不宜过长。
* 以上参数为通用参考范围，实际参数需结合具体牌号和模具试模验证。

产品资质：巴斯夫 BASF Ultramid B 系列PA6 聚酰胺，可根据项目需求提供 TDS 技术资料、SDS 安全资料及原厂技术支持。

环保声明：符合欧盟 RoHS、REACH 法规要求，适用于工业制品生产。

免责声明：以上物性数据基于公开资料和典型应用经验，实际应用请结合具体配方和工艺进行验证。更多产品型号请联系 daoqinsh.com | 数据仅供参考，以原厂最新 TDS 为准。

If you have any questions about BASF Ultramid B 3M5 PA6 Polyamide 25% Mineral Filled Mineral Filled Grade, or would like to request BASF Ultramid B 3M5 PA6 Polyamide 25% Mineral Filled Mineral Filled Grade datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.

BASF Ultramid B 3M5 PA6 Polyamide 25% Mineral Filled Mineral Filled Grade Properties, BASF Ultramid B 3M5 PA6 Polyamide 25% Mineral Filled Mineral Filled Grade Product Parameters, BASF Ultramid B 3M5 PA6 Polyamide 25% Mineral Filled Mineral Filled Grade Performance Data, BASF Ultramid B 3M5 PA6 Polyamide 25% Mineral Filled Mineral Filled Grade Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA