BASF Ultramid A 3EG3 PA66 Polyamide 15% Glass Fiber General Reinforced Grade - Product Center - 星空官网入口

Ultramid A A 3EG3 — PA66 聚酰胺

巴斯夫 BASF | 高性能工程塑料

产品牌号Ultramid A A 3EG3

产品系列Ultramid A

材料类型PA66 聚酰胺

增强/填充15%玻璃纤维

产品级别通用增强级

生产厂家巴斯夫 BASF

15%玻璃纤维增强

通用增强级PA66

刚性和韧性平衡好

加工性优异

适合广泛工业应用

通用增强注塑件

电子电气配件

汽车功能件

工业结构件

干燥建议：80~90°C / 4~8小时 / <0.2%

注意事项：PA66吸湿性强，必须充分干燥(含水率<0.2%)；结晶速率快，模温对结晶度和性能影响大。
* 以上参数为通用参考范围，实际参数需结合具体牌号和模具试模验证。

产品资质：巴斯夫 BASF Ultramid A 系列PA66 聚酰胺，可根据项目需求提供 TDS 技术资料、SDS 安全资料及原厂技术支持。

环保声明：符合欧盟 RoHS、REACH 法规要求，适用于工业制品生产。

免责声明：以上物性数据基于公开资料和典型应用经验，实际应用请结合具体配方和工艺进行验证。更多产品型号请联系 daoqinsh.com | 数据仅供参考，以原厂最新 TDS 为准。

If you have any questions about BASF Ultramid A 3EG3 PA66 Polyamide 15% Glass Fiber General Reinforced Grade, or would like to request BASF Ultramid A 3EG3 PA66 Polyamide 15% Glass Fiber General Reinforced Grade datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.

BASF Ultramid A 3EG3 PA66 Polyamide 15% Glass Fiber General Reinforced Grade Properties, BASF Ultramid A 3EG3 PA66 Polyamide 15% Glass Fiber General Reinforced Grade Product Parameters, BASF Ultramid A 3EG3 PA66 Polyamide 15% Glass Fiber General Reinforced Grade Performance Data, BASF Ultramid A 3EG3 PA66 Polyamide 15% Glass Fiber General Reinforced Grade Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA