EN
- Product Details
Basic Parameters
DIC PPS Z-650 — PPS 聚苯硫醚(交联型)
日本油墨 DIC Corporation | DIC.PPS Z系列
一、产品基础参数
产品牌号Z-650
产品系列DIC PPS Z系列(交联型)
材料类型PPS 聚苯硫醚(交联型)
增强/填充矿物增强
阻燃等级UL 94 V-0
力学性能拉伸强度90MPa，弯曲模量6GPa，HDT 260°C
生产厂家日本油墨 DIC Corporation
二、产品核心特性
矿物增强交联级，矿物增强交联PPS，低翘曲
交联结构提供更高的耐热性和耐蠕变性
长期使用温度可达200~220°C
耐化学性极佳(耐油、溶剂、酸碱)
inherently阻燃(UL94 V-0)
涂层/复合材料应用广泛(粉末级)
三、典型应用领域
大面积平板件
低翘曲电气零件
四、加工工艺建议
PPS建议预干燥：120~150°C/3~4小时。
| 工艺参数 | 推荐范围 |
|---|---|
| 料筒温度 | 310~350°C |
| 喷嘴温度 | 320~340°C |
| 模具温度 | 140~170°C |
| 注射压力 | 80~150 MPa |
| 保压压力 | 40~80 MPa |
| 螺杆转速 | 40~80 rpm |
注意事项：交联型PPS熔体粘度高于线性型，注射压力需适当提高；交联型粉末(Z-200等)可用于喷涂和复合材料。
* 以上参数为PPS交联型通用参考范围。
* 以上参数为PPS交联型通用参考范围。
产品资质：日本油墨 DIC PPS Z系列，可根据项目需求提供 TDS 技术资料及原厂技术支持。
环保声明：产品符合欧盟 RoHS、REACH 法规要求。
免责声明：以上物性数据基于公开资料和典型应用经验，更多产品型号请联系 daoqinsh.com | 数据仅供参考，以原厂最新 TDS 为准。
- If you have any questions about Japan Ink DIC PPS Z-650 Mineral Reinforced Crosslinked Grade Polyphenylene Sulfide (Crosslinked Type), or would like to request Japan Ink DIC PPS Z-650 Mineral Reinforced Crosslinked Grade Polyphenylene Sulfide (Crosslinked Type) datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.
Product Features
- Japan Ink DIC PPS Z-650 Mineral Reinforced Crosslinked Grade Polyphenylene Sulfide (Crosslinked Type) Properties, Japan Ink DIC PPS Z-650 Mineral Reinforced Crosslinked Grade Polyphenylene Sulfide (Crosslinked Type) Product Parameters, Japan Ink DIC PPS Z-650 Mineral Reinforced Crosslinked Grade Polyphenylene Sulfide (Crosslinked Type) Performance Data, Japan Ink DIC PPS Z-650 Mineral Reinforced Crosslinked Grade Polyphenylene Sulfide (Crosslinked Type) Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA
- Tags
