Ube UBESTA PA12 5030U PA12 Polyamide Unfilled High Flexibility Grade - Product Center - 星空官网入口

UBE Nylon 5030U — PA12 聚酰胺

日本宇部兴产 UBE Industries | 高性能聚酰胺工程塑料

产品牌号UBE Nylon 5030U

产品系列UBESTA PA12

材料类型PA12 聚酰胺

增强/填充未填充

产品级别高柔性级

生产厂家日本宇部 UBE Industries

未填充高柔性PA12

极高的柔性和弹性

低温韧性好

耐疲劳性优异

适合反复弯曲和柔性应用

高柔性配件

弹簧件

反复弯曲件

耐疲劳结构件

干燥建议：80~100°C / 4~6小时 / <0.1%

注意事项：PA12吸湿性低于PA6/PA66但仍需预干燥；加工温度窗口较宽，模温对结晶度和韧性有影响。
* 以上参数为通用参考范围，实际参数需结合具体牌号和模具试模验证。

产品资质：日本宇部兴产 UBE Nylon® 系列PA12 聚酰胺，可根据项目需求提供 TDS 技术资料、SDS 安全资料及原厂技术支持。

环保声明：符合欧盟 RoHS、REACH 法规要求，适用于汽车、电子电气及工业制品生产。

免责声明：以上物性数据基于公开资料和典型应用经验，实际应用请结合具体配方和工艺进行验证。更多产品型号请联系 daoqinsh.com | 数据仅供参考，以原厂最新 TDS 为准。

If you have any questions about Ube UBESTA PA12 5030U PA12 Polyamide Unfilled High Flexibility Grade, or would like to request Ube UBESTA PA12 5030U PA12 Polyamide Unfilled High Flexibility Grade datasheet, MSDS, ROHS test report, SGS report, REACH certificate, FDA certificate, EU regulation certificate, UL certificate, or COC/COA report, please call our service hotline +86-192-7986-4570, or click Contact Us to leave us a message.

Ube UBESTA PA12 5030U PA12 Polyamide Unfilled High Flexibility Grade Properties, Ube UBESTA PA12 5030U PA12 Polyamide Unfilled High Flexibility Grade Product Parameters, Ube UBESTA PA12 5030U PA12 Polyamide Unfilled High Flexibility Grade Performance Data, Ube UBESTA PA12 5030U PA12 Polyamide Unfilled High Flexibility Grade Factory Report, MSDS, Material Safety Data Sheet, UL Yellow Card, SGS Report, RoHS, Food Grade Certification, NSF Drinking Water Standard, Product Information, Product Performance, Factory Report, Original Packaging, Authorized Distributor, Heat Deflection Temperature, Melt Index, Flow Coefficient, Impact Resistance, Impact Strength, Low Temperature Toughness, Low Temperature Impact Resistance, Melt Flow Rate, Processing Technology, Processing Parameters, Processing Temperature, EU RoHS, German FDA, US FDA, Japan FDA